BuMat PETG Filament - Blue

$29.99

Quantity

Specifications:

Characteristics:

Behaves as a combination of ABS and PLA
Good tenacity, excellent hardness, high impact strength as much as 30 times stronger than PLA
Excellent breaking elongation, corrosion resistance, and good weather resistance including UV

Advantages:

Excellent transparency with light transmittance at 90%
High glossy finish
Temperature resistance of around 80°C
Low shrinkage for creating objects dimensionally corrected objects and less warping
Good shock resistance between layers
Objects that require post-processing add ons – drilling, assembly, coloring, etc…
Stress resistance - Does not yield “creamy white spot” due to stress for objects with thin walls

Parameters:

Filament Diameter: 1.75 mm
Filament Weight: 1 kg (2.2 lbs)
Printing Temperature: 220~240°C (Printing temp. range for larger models: 230~240°C; Printing temp.range for small or thin-wall models: 220~230°C)
Heated Bed Temperature: 80~100°C (No heated build plate required for objects with small footprint; build plate at 80~100°C for objects with larger footprint)
Printing Speed: 60~90mm/s

Specifications:

Characteristics:

Behaves as a combination of ABS and PLA
Good tenacity, excellent hardness, high impact strength as much as 30 times stronger than PLA
Excellent breaking elongation, corrosion resistance, and good weather resistance including UV

Advantages:

Excellent transparency with light transmittance at 90%
High glossy finish
Temperature resistance of around 80°C
Low shrinkage for creating objects dimensionally corrected objects and less warping
Good shock resistance between layers
Objects that require post-processing add ons – drilling, assembly, coloring, etc…
Stress resistance - Does not yield “creamy white spot” due to stress for objects with thin walls

Parameters:

Filament Diameter: 1.75 mm
Filament Weight: 1 kg (2.2 lbs)
Printing Temperature: 220~240°C (Printing temp. range for larger models: 230~240°C; Printing temp.range for small or thin-wall models: 220~230°C)
Heated Bed Temperature: 80~100°C (No heated build plate required for objects with small footprint; build plate at 80~100°C for objects with larger footprint)
Printing Speed: 60~90mm/s